Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sasa, Toshinobu
Purazuma, Kaku Yugo Gakkai-Shi, 98(5), p.211 - 215, 2022/05
Lead-bismuth eutectic (LBE) alloy is promising as a spallation target for next-generation reactor coolants and accelerator drive systems (ADS) due to its nuclear and chemical properties. LBE is a heavy metal, and it has good properties both as a spallation target and as a coolant for nuclear transmutation systems of long-lived radioactive nuclei. On the other hand, to improve compatibility with structural materials is one of the major issues in its utilization. The latest research results such as high-temperature operation of LBE and oxygen concentration control to ensure corrosion resistance with the aim of early commercialization of nuclear conversion technology by ADS is introduced.
Obayashi, Hironari; Yamaki, Kenichi*; Yoshimoto, Hidemitsu*; Kita, Satoshi*; Wan, T.*; Sasa, Toshinobu
JAEA-Technology 2021-035, 66 Pages, 2022/03
JAEA-Technology-2021-035.pdf:4.26MB
Construction of Transmutation Experimental Facility (TEF) is under planning in Japan Proton Accelerator Research Complex (J-PARC) program to promote R&Ds on realization of transmutation technology by an accelerator driven system (ADS). As a facility of TEF, ADS Target Test Facility (TEF-T) will provide a spallation target to study target technology and perform post irradiation examination (PIE) of candidate materials of ADS. In ADS, lead-bismuth eutectic (LBE) alloy is used as a spallation target material and a core coolant. As is well known, LBE has corrosive to structural materials hence each component of the target system should provide compatibility with LBE. In addition, instrumentations for LBE are restricted by the target operation condition such as high temperature and irradiation environment. The devices for LBE have been developed individually to achieve the LBE target system. "Integrated Multi-functional MOckup for TEF-T Real-scale TArget Loop, IMMORTAL" was fabricated as a mock-up test loop of the target for the purpose of the integration testing of individually developed devices. This report describes an overview of IMMORTAL and the design of the installed devices.
Maekawa, Fujio
JPS Conference Proceedings (Internet), 33, p.011042_1 - 011042_6, 2021/03
Development of beam window (BW) materials is one of crucial issues in development of accelerator driven nuclear transmutation systems (ADS). The BW is exposed to high energy protons and spallation neutrons, and also to corrosive lead-bismuth eutectic (LBE) alloy at high temperature of about 500
C. Recently, not only high-power accelerators but also high-power targets are the rate-limiting factor for increasing the power of accelerator facilities in terms of radiation damage and heat removal. To study radiation damage on BW and target materials for high-power accelerator facilities including ADS, we are planning a materials irradiation facility by utilizing the proton beam of 400 MeV and 250 kW provided by the J-PARC's Linac. The target is flowing LBE alloy which is a candidate target and coolant material of ADS. When a steel sample is irradiated in the target for one year, the sample receives radiation damage of about 10 dpa at maximum which is equivalent to the yearly radiation damage of ADS's BW. In the current facility concept, the facility is equipped with a hot-laboratory for efficient post-irradiation examination. The facility will be outlined in this presentation.
Miyahara, Shinya*; Ohdaira, Naoya*; Arita, Yuji*; Maekawa, Fujio; Matsuda, Hiroki; Sasa, Toshinobu; Meigo, Shinichiro
Nuclear Engineering and Design, 352, p.110192_1 - 110192_8, 2019/10
Times Cited Count：5 Percentile：48.18(Nuclear Science & Technology)Lead-Bismuth Eutectic (LBE) is used as a spallation neutron target and coolant materials of Accelerator Driven System (ADS), and many kinds of elements are produced as spallation products. It is important to evaluate the release and transport behavior of the spallation products in the LBE. The inventories and the physicochemical composition of the spallation products produced in LBE have been investigated for an LBE loop in the ADS Target Test Facility (TEF-T) in J-PARC. The inventories of the spallation products in the LBE were estimated using the PHITS code. The physicochemical composition of the spallation products in the LBE was calculated using the Thermo-Calc code under the conditions of the operation temperatures of LBE from 350C to 500C and the oxygen concentrations in LBE from 10 ppb to 1 ppm. The calculation showed that the 5 elements of Rb, Tl, Tc, Os, Ir, Pt, Au and Hg were soluble in LBE under the all given conditions and any kinds of compound were not formed in LBE. It was suggested that the oxides of Ce, Sr, Zr and Y were stable as CeO
, SrO, ZrO and YO
in the LBE.
Wan, T.; Naoe, Takashi; Kogawa, Hiroyuki; Futakawa, Masatoshi; Obayashi, Hironari; Sasa, Toshinobu
Materials, 12(4), p.681_1 - 681_15, 2019/02
Times Cited Count：3 Percentile：17.62(Chemistry, Physical)Wan, T.; Obayashi, Hironari; Sasa, Toshinobu
Nuclear Technology, 205(1-2), p.188 - 199, 2019/01
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)Iwamoto, Hiroki; Maekawa, Fujio; Matsuda, Hiroki; Meigo, Shinichiro
JAEA-Technology 2017-029, 39 Pages, 2018/01
JAEA-Technology-2017-029.pdf:2.68MB
Under an assumption that an incident of lead-bismuth eutectic (LBE) leak from an LBE circulation system occurred during a 250-kW beam operation, an estimation of radiation dose at the site boundary for the ADS Target Test Facility (TEF-T) in Transmutation Experimental Facility (TEF) of J-PARC was conducted using various conservative assumptions. As a result, the radiation dose at the site boundary was estimated to be about 660 
Sv, which were dominated by mercury, noble gas, and iodine produced as spallation products from the LBE. Even though the incident scenario was made conservatively, it was shown that the estimated total dose was lower than the annual radiation dose due to natural sources, and the TEF-T has sufficient safety margin for the leak of radioactivity.
Sasa, Toshinobu; Saito, Shigeru; Obayashi, Hironari; Sugawara, Takanori; Wan, T.; Yamaguchi, Kazushi*; Yoshimoto, Hidemitsu
NEA/CSNI/R(2017)2 (Internet), p.111 - 116, 2017/06
Japan Atomic Energy Agency (JAEA) proposes to reduce the environmental impact caused from high-level radioactive waste by using Accelerator-driven system (ADS). To realize ADS, JAEA plans to build the Transmutation Experimental Facility (TEF) within the framework of J-PARC project. For the JAEA-proposed ADS, lead-bismuth eutectic alloy (LBE) is adopted as a coolant for subcritical core and spallation target. By using TEF in J-PARC, we are planning to solve technical difficulties for LBE utilization by completion of the data for the design of ADS. The 250kW LBE spallation target will be located in TEF facility to prepare material irradiation database. Various R&Ds for important technologies required to build the facilities are investigated such as oxygen content control, instruments development, remote handling techniques for target maintenance, and spallation target design. The large scale LBE loops for 250kW target mock up and material corrosion studies are also manufactured and ready for various experiments. The latest status of 250kW LBE spallation target optimization will be described in the presentation.
Nuclear Transmutation Division, J-PARC Center
JAEA-Technology 2017-003, 539 Pages, 2017/03
JAEA-Technology-2017-003.pdf:59.1MB
JAEA is pursuing R&D on volume reduction and mitigation of degree of harmfulness of high-level radioactive waste based on the "Strategic Energy Plan" issued in April 2014. Construction of Transmutation Experimental Facility is under planning as one of the second phase facilities in the J-PARC program to promote R&D on the transmutation technology with using accelerator driven systems (ADS). The TEF consists of two facilities: ADS Target Test Facility (TEF-T) and Transmutation Physics Experimental Facility (TEF-P). Development of spallation target technology and study on target materials are to be conducted in TEF-T with impinging a high intensity proton beam on a lead-bismuth eutectic target. Whereas in TEF-P, by introducing a proton beam to minor actinide loaded subcritical cores, physical properties of the cores are to be studied, and operation experiences are to be acquired. This report summarizes results of technical design for construction of one of two TEF facilities, TEF-T.
Oigawa, Hiroyuki; Sasa, Toshinobu; Kikuchi, Kenji; Nishihara, Kenji; Kurata, Yuji; Umeno, Makoto*; Tsujimoto, Kazufumi; Saito, Shigeru; Futakawa, Masatoshi; Mizumoto, Motoharu; et al.
Proceedings of 4th International Workshop on the Utilisation and Reliability of High Power Proton Accelerators, p.507 - 517, 2005/11
Under the framework of J-PARC, the Japan Atomic Energy Research Institute (JAERI) plans to construct the Transmutation Experimental Facility (TEF). The TEF consists of two facilities: the Transmutation Physics Experimental Facility (TEF-P) and the ADS Target Test Facility (TEF-T). The TEF-P is a critical facility which can accept a 600 MeV - 10 W proton beam. The TEF-T is a material irradiation facility using a 600 MeV - 200 kW proton beam, where a Pb-Bi target is installed, but neutron multiplication by nuclear fuel will not be attempted. This report describes the purposes of the facility, the present status of the conceptual design, and the expected experiments to be performed.
Oigawa, Hiroyuki; Tsujimoto, Kazufumi; Kikuchi, Kenji; Kurata, Yuji; Sasa, Toshinobu; Umeno, Makoto*; Nishihara, Kenji; Saito, Shigeru; Mizumoto, Motoharu; Takano, Hideki*; et al.
Proceedings of 4th International Workshop on the Utilisation and Reliability of High Power Proton Accelerators, p.325 - 334, 2005/11
The Japan Atomic Energy Research Institute (JAERI) is conducting the research and development (R&D) on the Accelerator-Driven Subcritical System (ADS) for the effective transmutation of minor actinides (MAs). The ADS proposed by JAERI is the 800 MWth, Pb-Bi cooled, tank-type subcritical reactor loaded with (MA+Pu) nitride fuel. The Pb-Bi is also used as the spallation target. In this study, the feasibility of the ADS was discussed with putting the focus on the design around the beam window. The partition wall was placed between the target region and the ductless-type fuel assemblies to keep the good cooling performance for the hot-spot fuel pin. The flow control nozzle was installed to cool the beam window effectively. The thermal-hydraulic analysis showed that the maximum temperature at the outer surface of the beam window could be repressed below 500 C even in the case of the maximum beam power of 30 MW. The stress caused by the external pressure and the temperature distribution of the beam window was also below the allowable limit.
Tsujimoto, Kazufumi; Oigawa, Hiroyuki; Ouchi, Nobuo; Kikuchi, Kenji; Kurata, Yuji; Mizumoto, Motoharu; Sasa, Toshinobu; Nishihara, Kenji; Saito, Shigeru; Umeno, Makoto*; et al.
Proceedings of International Conference on Nuclear Energy System for Future Generation and Global Sustainability (GLOBAL 2005) (CD-ROM), 6 Pages, 2005/10
The Japan Atomic Energy Research Institute (JAERI) has been proceeding with the research and development (R&D) on accelerator-driven subcritical system (ADS). The ADS proposed by JAERI is a lead-bismuth (Pb-Bi) eutectic cooled fast subcritical core with 800 MWth. To realize such an ADS, some technical issues should be studied, developed and demonstrated. JAERI has started a comprehensive R&D program since the fiscal year of 2002 to acquire knowledge and elemental technology that are necessary for the validation of engineering feasibility of the ADS. The first stage of the program had been continued for three years. The program is conducted by JAERI, and many institutes, universities and private companies were involved. Items of R&D are concentrated on three technical areas peculiar to the ADS: (1) superconducting linear accelerator (SC-LINAC), (2) Pb-Bi eutectic as spallation target and core coolant, and (3) subcritical core design and technology. In the present work, the outline and the results in the first stage of the program are reported.
Oigawa, Hiroyuki; Tsujimoto, Kazufumi; Kikuchi, Kenji; Kurata, Yuji; Sasa, Toshinobu; Umeno, Makoto*; Saito, Shigeru; Nishihara, Kenji; Mizumoto, Motoharu; Takano, Hideki*; et al.
EUR-21227 (CD-ROM), p.483 - 493, 2005/00
JAERI is conducting the study on the dedicated transmutation system using the accelerator driven subcritical system (ADS). A subcritical reactor with the thermal power of 800 MW has been proposed. Many research and development activities including the conceptual design study are under way and planned at JAERI to examine the feasibility of the ADS. In the field of the proton accelerator, a superconducting LINAC is being developed. In the field of the spallation target using lead-bismuth eutectic (LBE), material corrosion, thermal-hydraulics, polonium behavior, and irradiation effect on materials are being studied. Moreover, in the framework of the J-PARC project, JAERI plans to construct the Transmutation Experimental Facility (TEF) to study the feasibility of the ADS using a high-energy proton beam and nuclear fuel and to establish the technology for the LBE spallation target and relevant materials.
Kasugai, Yoshimi; Kai, Tetsuya; Maekawa, Fujio; Nakashima, Hiroshi; Takada, Hiroshi; Konno, Chikara; Numajiri, Masaharu*; Ino, Takashi*; Takahashi, Kazutoshi*
JAERI-Research 2003-034, 115 Pages, 2004/01
JAERI-Research-2003-034.pdf:4.18MB
Measurement of radioactivity induced by high-energy protons with energy of 2.83 and 24 GeV and spallation neutrons produced by bombarding a mercury target with the high-energy protons were performed by using the AGS (Alternative Gradient Synchrotron) accelerator at Brookhaven National Laboratory. The samples of boron, carbon, aluminum, iron, copper, niobium, mercury-oxide, lead, bismuth, acrylic resin, SS-316, Inconel-625 and Inconel-718 were irradiated around the mercury target. After the irradiation, the radioactivity of each sample was measured by using HPGe detectors at the cooling time between 2 h and 200 d. In the processing of the measured 
-ray spectra, more than 90 radioactive nucleus were identified, and the radioactivity data were obtained. This report gives the experimental procedure, the data processing and the experimental results in detail.
Kikuchi, Kenji; Kawai, Masayoshi*; Ikeda, Yujiro
Proceedings of 6th International Meeting on Nuclear Applications of Accelerator Technology (AccApp '03) (CD-ROM), p.17 - 25, 2004/00
Spallation target being developed for high intensity neutron source of MW incident proton power. Mercury is a primary target material in pulsed spallation neutron sources, lead-bismuth is a candidate target material in the accelerator-driven system (ADS) for nuclear transmutation, and tungsten is a back-up solid target for pulsed spallation neutron sources and a candidate for ADS target. Current status of these project and materials issues are stated.
Kikuchi, Kenji; Saito, Shigeru; Kurata, Yuji; Futakawa, Masatoshi; Sasa, Toshinobu; Oigawa, Hiroyuki; Umeno, Makoto*; Mori, Keijiro*; Takano, Hideki; Wakai, Eiichi
Proceedings of 11th International Conference on Nuclear Engineering (ICONE-11) (CD-ROM), 7 Pages, 2003/04
In order to construct ADS Target Test facility in J-PARC project the research and development on Pb-Bi technology have been carried, which cover target design with computer simulation, flowing loop test, stagnant corrosion test, oxygen sensor and cleaning techniques. Obtained results are as follows: Corrosion rate of SUS316 under flowing Pb-Bi at 1m/s at 450C is 0.1 mm / 3000 hrs. Fe and Cr were melted into lead bismuth from SS316 in the high temperature part and deposited in the low-temperature part according to the difference of solubility. The corrosion thickness decreases with increasing Cr content in the stagnant corrosion test at saturated oxygen concentration. Reliable oxygen sensors are to be developed by using suitable reference electrodes. As a result of cleaning tests, blushing process was needed to remove Pb-Bi effectively after immersion in the silicon oil. The mixed acid easily dissolved Pb-Bi and removed almost perfectly. But specimens themselves were affected by coloring.
Oigawa, Hiroyuki
Genshikaku Kenkyu, 47(6), p.39 - 52, 2003/03
Minor actinide (MA) and long-lived fission product (LLFP) keep their radiological toxicity in high level waste of nuclear fuel cycle for long period. In order to transmute such nuclides to short-lived or stable ones, the Accelerator-Driven Transmutation System (ADS) is proposed and developed. This article presents the current status of the research and development on ADS, technical issues to be solved, the experimental program under the framework of the High-Intensity Proton Accelerator Project (J-PARC), and worldwide activities.
Oigawa, Hiroyuki; Ouchi, Nobuo; Kikuchi, Kenji; Tsujimoto, Kazufumi; Kurata, Yuji; Sasa, Toshinobu; Takano, Hideki; Nishihara, Kenji; Saito, Shigeru; Futakawa, Masatoshi; et al.
Proceedings of GLOBAL2003 Atoms for Prosperity; Updating Eisenhower's Global Vision for Nuclear Energy (CD-ROM), p.1374 - 1379, 2003/00
JAERI is developing an Accelerator Driven System (ADS) for transmutation of nuclear waste such as minor actinide and long-lived fission product. To acquire the knowledge and the elemental technology that are necessary for the validation of engineering feasibility of ADS, JAERI has started a comprehensive research and development (R&D) program since 2002. The first stage of the program will be continued for three years. The program is conducted by JAERI with many institutes, universities and private companies. Items of R&D are concentrated on three technical areas peculiar to ADS: (1) a superconducting linear accelerator, (2) lead-bismuth eutectic as spallation target and core coolant, and (3) subcritical core design and physics. The outline and the preliminary results of the program are summarized in the present report.
Oigawa, Hiroyuki; Sasa, Toshinobu; Takano, Hideki; Tsujimoto, Kazufumi; Nishihara, Kenji; Kikuchi, Kenji; Kurata, Yuji; Saito, Shigeru; Futakawa, Masatoshi; Umeno, Makoto*; et al.
Proceedings of 13th Pacific Basin Nuclear Conference (PBNC 2002) (CD-ROM), 8 Pages, 2002/10
To reduce the burden on the final disposal of the nuclear waste, the Acclelerator-Driven System (ADS) which can transmute minor actinides efficiently has been studied in JAERI. The proposed ADS design is an 800MWth subcritical core with lead-bismuth coolant and minor-actinide nitride fuel driven by a neutron source of a superconductivity linear accelerator with 30MW and a lead-bismuth spallation target. To realize the ADS, many research and development are under way in the fields of the accelerator, the spallation target and the nitride fuel. Moreover, a new experimental facility, the Transmutation Experimental Facility, is proposed under a framework of the High-Intensity Proton Accelerator Project to study the feasibility of the ADS from physics and engineering aspects.
Nakashima, Hiroshi; Takada, Hiroshi; Kasugai, Yoshimi; Meigo, Shinichiro; Maekawa, Fujio; Kai, Tetsuya; Konno, Chikara; Ikeda, Yujiro; Oyama, Yukio; Watanabe, Noboru; et al.
Journal of Nuclear Science and Technology, 39(Suppl.2), p.1155 - 1160, 2002/08
no abstracts in English
